Description
Single dosing on the Anfim Scody
The Scody sits at the top of Anfim’s on-demand range. The Scody II is specified with 75 mm flat hardened steel burrs and a shut-off hopper holding around 5 lb of beans — a grinder built to be loaded once and worked through a full service.
That is the opposite of a single dosing workflow. Five pounds of beans sitting above the burrs is not something you want when you are grinding 18 g at a time or switching between roasts.
Large burrs, more to clear
A 75 mm burr set has a big chamber and a long exit path, so there is more surface for grounds to rest on between doses than on a smaller grinder. This hopper replaces the stock hopper so you can dose in individually, and the silicone bellows gives you a way to push that retained material out after each grind instead of letting it season the next one.
Version 3
Every unit we ship today is Version 3. The bellows is a custom branded, factory moulded silicone part — it is no longer 3D printed, as our earlier versions were.
How it is made
- 3D printed: lid, lid lock ring, connector, air-leak prevention gasket
- Factory machine moulded: silicone bellows
Materials
- Lid, lock ring, connector: PETG hard plastic
- Air-leak prevention gasket: TPU — material info
- Bellows: factory moulded silicone
Fitting
This hopper is made for the grinder named on this page. Fit tolerances vary between units and production runs, so minor adjustment may be needed to seat it perfectly on your grinder. Every unit is covered by our 2 year warranty.
